EVAL-AD7405FMCZ Datasheet, PDF (12/20 Pages) Analog Devices – Full featured evaluation board

UG-690
EVALUATION BOARD SOFTWARE
STARTING THE SOFTWARE
After the EVAL-AD7405FMCZ and EVAL-SDP-CH1Z boards
are correctly connected to your PC, the evaluation software can
be started.
1. From the Start menu, select Programs > Analog Devices >
AD7405. The main window of the software then opens
(see Figure 14).
2. If the EVAL-AD7405FMCZ is not connected to the USB
port via the EVAL-SDP-CH1Z when the software is
launched, a connectivity error displays (see Figure 13).
Connect the evaluation board to the USB port of the PC,
wait a few seconds, click Rescan, and follow the instructions.
EVAL-AD7405FMCZ User Guide
Figure 13. Connectivity Error Alert
Rev. 0 | Page 12 of 20