EVAL-AD7405FMCZ Datasheet, PDF (4/20 Pages) Analog Devices – Full featured evaluation board

UG-690
SOFTWARE INSTALLATION PROCEDURES
The EVAL-AD7405FMCZ evaluation kit includes a CD
containing evaluation software to be installed on your PC
before you begin using the evaluation board.
There are two parts to the installation:
• EVAL-AD7405FMCZ evaluation software installation
• EVAL-SDP-CH1Z system demonstration platform board
driver installation
Warning
The evaluation board software and drivers must be installed
before connecting the evaluation board and EVAL-SDP-CH1Z
board to the USB port of the PC to ensure that the evaluation
system is correctly recognized when it is connected to the PC.
Installing the EVAL-AD7405FMCZ Evaluation Software
To install the EVAL-AD7405FMCZ evaluation software,
1. Insert the included evaluation software installation CD into
the CD drive of a Windows-based PC, and open the
contents of the CD.
2. Double-click the setup.exe file to begin the installation.
By default, the software is saved to the following location:
C:\Program Files\Analog Devices\AD740X\
3. A dialog box appears asking for permission to allow the
program to make changes to your computer. Click Yes to
begin the installation process (see Figure 3).
EVAL-AD7405FMCZ User Guide
Figure 4. Evaluation Software Installation—Destination Directory
5. A license agreement appears. Read the agreement and then
select I accept the License Agreement and click Next.
6. A summary of the installation is displayed. Click Next to
continue (see Figure 5).
Figure 3. Evaluation Software Installation—User Account Control
4. Select the location to install the software, and then click
Next (see Figure 4).
Figure 5. Evaluation Software Installation—Start Installation
7. A dialog box informs you when the evaluation software
installation is complete. Click Next to proceed with the
installation of the drivers (see Figure 6).
Figure 6. Evaluation Software Installation—Installation Complete
Rev. 0 | Page 4 of 20