82-000760-01 Datasheet, PDF (34/44 Pages) Analog Devices – HPUSB USB and HPPCI Emulators

LEDs
Board LEDs
Figure 2-2. Board LEDs
• VCC – This LED signifies that the board is receiving 5V power. If
this LED is not active, the HPPCI-ICE does not function properly.
• 3V – This LED signifies that the board is receiving 3.3V power. If
this LED is not active, the HPPCI-ICE does not function properly.
• FPGA[1:0] – These two LEDs are used for factory purposes only.
• DONE – This LED is activated when a a CrossCore Embedded
Studio or VisualDSP++ debug session is started. The LED should
remain active even after the respective session has been terminated.
The LED shuts off and re-activates at the beginning of every new
session.
2-4
HPUSB, USB, and HPPCI Emulators User’s Guide