82-000760-01 Datasheet, PDF (18/44 Pages) Analog Devices – HPUSB USB and HPPCI Emulators

USB- and PCI-based Emulator Installation Tasks
Note: If you connect the emulator first (before installing CCES or
VisualDSP++) to the PC, the Windows driver wizard will not find
the drivers for the emulator.
2. Connect one side of the provided USB cable to the USB assembly
of the emulator and the other side to an open USB port of your
computer.
Verifying Driver Installation and Attaching to an Emulation Target is
next.
Installing a PCI-Based Emulator
 The driver must be installed before you start the HPPCI-ICE for
the first time.
1. Install the HPPCI-ICE hardware. For instructions on installing a
PCI card into your computer, consult documentation provided by
the computer manufacturer.
2. Install VisualDSP++. VisualDSP++ includes the HPPCI driver
needed for your PCI emulation hardware. Refer to the Visu-
alDSP++ Installation Quick Reference Card for details.
Verifying Driver Installation and Attaching to an Emulation Target is
next.
1-4
HPUSB, USB, and HPPCI Emulators User’s Guide