UG-572 Datasheet, PDF (1/20 Pages) Winchester Electronics Corporation – C JACK

EVAL-ADE7978EBZ User Guide
UG-572
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: [phone] • Fax: [phone] • www.analog.com
Evaluating the ADE7978/ADE7933/ADE7932 Isolated Metering Chipset
FEATURES
ONLINE RESOURCES
Full featured evaluation board for the ADE7978/ADE7933/
ADE7932
PC control in conjunction with the system demonstration
platform (EVAL-SDP-CB1Z)
PC software for control and data analysis (time and
frequency domain)
Standalone capability
EVALUATION KIT CONTENTS
ADE7978/ADE7933 evaluation board
SDP interface board
ADDITIONAL EQUIPMENT NEEDED
EVAL-SDP-CB1Z (must order separately)
includes a USB cable
4 current sensing shunts
Precision current and voltage signal source
SMB cables
PC running Windows XP SP2, Windows Vista, or Windows 7
with USB 2.0 port
Documents
ADE7978/ADE7933/ADE7932 data sheet
EVAL-ADE7978EBZ user guide
Required Software
EVAL-ADE7978EBZ evaluation software (download from
product page)
Design and Integration Files
Schematics, layout files, bill of materials
GENERAL DESCRIPTION
The ADE7978/ADE7933 evaluation kit includes two boards
that allow the performance of the isolated metering chipsets to
be evaluated in a context very close to an actual three-phase meter
implementation. Although this kit can also be used to test the
ADE7932 isolated ADC, the board is populated with only
ADE7978 and ADE7933 devices and thus only the ADE7978
and ADE7933 are referred to in this user guide. The kit requires
purchasing a third board, the controller board for the system
demonstration platform (EVAL-SDP-CB1Z). The ADE7978/
ADE7933 evaluation kit includes evaluation software, written in
LabVIEW®, that provides access to the registers and features of the
chipsets using a PC interface.
TYPICAL SETUP
Figure 1. Connected to the SDP Interface and SDP Boards
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 20