BUF04 Datasheet, PDF (1/16 Pages) Analog Devices – Closed-Loop High Speed Buffer

a
FEATURES
Bandwidth – 110 MHz
Slew Rate – 3000 V/␮s
Low Offset Voltage – <1 mV
Very Low Noise – < 4 nV/√Hz
Low Supply Current – 8.5 mA Mux
Wide Supply Range – ؎5 V to ؎15 V
Drives Capacitive Loads
Pin Compatible with BUF03
APPLICATIONS
Instrumentation Buffer
RF Buffer
Line Driver
High Speed Current Source
Op Amp Output Current Booster
High Performance Audio
High Speed AD/DA
Closed-Loop
High Speed Buffer
BUF04*
FUNCTIONAL BLOCK DIAGRAMS
8-Lead Narrow-Body SO
(S Suffix)
Plastic DIP
8-Lead and Cerdip
(P, Z Suffix)
1
BUF04
NULL 1
NC 2
IN 3
V– 4
BUF04
Top View
8 NULL
7 V+
6 OUT
5 NC
NC = NO CONNECT
GENERAL DESCRIPTION
The BUF04 is a wideband, closed-loop buffer that combines
state of the art dynamic performance with excellent dc
performance. This combination enables designers to maximize
system performance without any speed versus dc accuracy
compromises.
Built on a high speed Complementary Bipolar (CB) process for
better power performance ratio, the BUF04 consumes less than
8.5 mA operating from ±5 V or ±15 V supplies. With a 2000 V/µs
min slew rate, and 100 MHz gain bandwidth product, the
BUF04 is ideally suited for use in high speed applications where
low power dissipation is critical.
Full ± 10 V output swing over the extended temperature range
along with outstanding ac performance and high loop gain
accuracy makes the device useful in high speed data acquisition
systems.
High slew rate and very low noise and THD, coupled with wide
input and output dynamic range, make the BUF04 an excellent
choice for video and high performance audio circuits.
The BUF04’s inherent ability to drive capacitive loads over a
wide voltage and temperature range makes it extremely useful
for a wide variety of applications in military, industrial, and
commercial equipment.
The BUF04 is specified over the extended industrial (–40°C to
+85°C) and military (–55°C to +125°C) temperature range.
BUF04s are available in plastic and ceramic DIP plus SO-8
surface mount packages.
Contact your local sales office for MIL-STD-883 data sheet and
availability.
*Patent pending.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
Fax: [phone]