PAC5223 Datasheet, PDF (7/67 Pages) Active-Semi, Inc – Power Application Controller

PAC5223
Power Application Controller
1. GENERAL DESCRIPTION
The PAC5223 belongs to Active-Semi's broad portfolio of full-featured Power Application Controller^TM (PAC) products that
are highly optimized for controlling and powering next generation smart energy appliances, devices, and equipment. These
application controllers integrate a 50MHz ARM^® Cortex^TM-M0 32-bit microcontroller core with Active-Semi's proprietary
and patent-pending Multi-Mode Power Manager^TM, Configurable Analog Front End^TM, and Application Specific Power
Drivers^TM to form the most compact microcontroller-based power and general purpose application systems ranging from
digital power supply to motor control. The PAC5223 microcontroller features up to 32kB of embedded FLASH and 8kB of
SRAM memory, a high-speed 10-bit 1µs analog-to-digital converter (ADC) with dual auto-sampling sequencers,
5V/3.3V I/Os, flexible clock sources, timers, a versatile 14-channel PWM engine, and several serial interfaces.
The Multi-Mode Power Manager (MMPM) provides “all-in-one” efficient power management solution for multiple types
of power sources. It features a configurable multi-mode switching supply controller capable of operating in buck, SEPIC or
AC/DC Flyback mode, and up to four linear regulated voltage supplies. The Application Specific Power Drivers (ASPD)
are high-voltage power drivers designed for each target set of control applications, including half bridge, H-bridge, 3-phase,
intelligent power module (IPM), and general purpose driving. The Configurable Analog Front End (CAFE) comprises
differential programmable gain amplifiers, single-ended programmable gain amplifiers, comparators, digital-to-analog
converters, and I/Os for programmable and inter-connectible signal sampling, feedback amplification, and sensor
monitoring of multiple analog input signals. Together, these modules and microcontroller enable a wide range of compact
applications with highly integrated power management, driving, feedback, and control for DC supply up to 70V and for line
AC supply.
Figure 1-1. Power Application Controller
SERIAL
INTERFACE
SPI, I²²C, UART
PWM ENGINE
4 16-bit timers,
14 channels,
HW dead-time control,
10ns resolution control
MULTI-MODE
POWER MANAGER
AC/DC, DC/DC,
linear regulators
50MHz ARM CORTEX-M0
MICROCONTROLLER CORE & MEMORY
1-cycle 32-bit multiplier,
24-bit RTC, 24-bit WDT, 24-bit SysTick, NVIC,
FLASH & SRAM
APPLICATION
SPECIFIC POWER
DRIVERS
High-side & low-side
gate drivers
DATA ACQUISITION
& SEQUENCER
10-bit 1µs ADC,
dual auto-sampling
sequencer
CONFIGURABLE ANALOG FRONT END
3 Differential PGAs,
4 Single-ended PGAs,
10 Comparators,
2 DACs (10-bit & 8-bit),
Temperature monitor
The PAC5223 is available in a 48-pin, 6x6 mm TQFN package. The PAC family includes a range of part numbers
optimized to work with different targeted primary applications.
-7-
Rev 1.10‒January 28, 2016