English
Language : 

A3P1000-1FGG144M Datasheet, PDF (62/181 Pages) Actel Corporation – Military ProASIC3/EL Low-Power Flash FPGAs
Military ProASIC3/EL Low-Power Flash FPGAs
Table 2-64 • 2.5 V LVCMOS Low Slew
Military-Case Conditions: TJ = 125°C, Worst-Case VCC = 1.425 V, Worst-Case VCCI = 2.3 V
Applicable to Advanced I/O Banks for A3P1000 Only
Drive
Strength
4 mA
Speed
Grade
Std.
tDOUT
0.63
tDP
7.07
tDIN
0.05
tPY
1.44
tEOUT
0.45
tZL
7.20
tZH
6.32
tLZ
2.95
tHZ
2.43
tZLS
9.66
tZHS
8.78
Units
ns
–1
0.54 6.02 0.04 1.23 0.39 6.13 5.38 2.51 2.06 8.22 7.47 ns
6 mA
Std. 0.63 5.91 0.05 1.44 0.45 6.02 5.42 3.35 3.18 8.48 7.88 ns
–1
0.54 5.03 0.04 1.23 0.39 5.12 4.61 2.85 2.70 7.21 6.70 ns
8 mA
Std. 0.63 5.91 0.05 1.44 0.45 6.02 5.42 3.35 3.18 8.48 7.88 ns
–1
0.54 5.03 0.04 1.23 0.39 5.12 4.61 2.85 2.70 7.21 6.70 ns
12 mA
Std. 0.63 5.05 0.05 1.44 0.45 5.15 4.79 3.63 3.66 7.61 7.25 ns
–1
0.54 4.30 0.04 1.23 0.39 4.38 4.07 3.09 3.11 6.47 6.17 ns
16 mA
Std. 0.63 4.78 0.05 1.44 0.45 4.86 4.65 3.70 3.78 7.32 7.10 ns
–1
0.54 4.06 0.04 1.23 0.39 4.14 3.95 3.14 3.22 6.23 6.04 ns
24 mA
Std. 0.63 4.71 0.05 1.44 0.45 4.73 4.71 3.78 4.26 7.19 7.17 ns
–1
0.54 4.01 0.04 1.23 0.39 4.03 4.01 3.21 3.62 6.12 6.10 ns
Note: For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-8 for derating
values.
Table 2-65 • 2.5 V LVCMOS High Slew
Military-Case Conditions: TJ = 125°C, Worst-Case VCC = 1.425 V, Worst-Case VCCI = 2.3 V
Applicable to Advanced I/O Banks for A3P1000 Only
Drive
Strength
4 mA
Speed
Grade
Std.
tDOUT
0.63
tDP
3.63
tDIN
0.05
tPY
1.44
tEOUT
0.45
tZL
3.70
tZH
3.34
tLZ
2.94
tHZ
2.53
tZLS
6.16
tZHS
5.80
Units
ns
–1
0.54 3.09 0.04 1.23 0.39 3.15 2.84 2.51 2.16 5.24 4.94 ns
6 mA
Std. 0.63 2.99 0.05 1.44 0.45 3.04 2.59 3.35 3.30 5.50 5.05 ns
–1
0.54 2.54 0.04 1.23 0.39 2.59 2.20 2.85 2.81 4.68 4.30 ns
8 mA
Std. 0.63 2.99 0.05 1.44 0.45 3.04 2.59 3.35 3.30 5.50 5.05 ns
–1
0.54 2.54 0.04 1.23 0.39 2.59 2.20 2.85 2.81 4.68 4.30 ns
12 mA
Std. 0.63 2.65 0.05 1.44 0.45 2.70 2.23 3.63 3.78 5.16 4.69 ns
–1
0.54 2.26 0.04 1.23 0.39 2.30 1.89 3.09 3.22 4.39 3.99 ns
16 mA
Std. 0.63 2.59 0.05 1.44 0.45 2.64 2.16 3.70 3.90 5.10 4.62 ns
–1
0.54 2.21 0.04 1.23 0.39 2.25 1.83 3.15 3.32 4.34 3.93 ns
24 mA
Std. 0.63 2.61 0.05 1.44 0.45 2.66 2.08 3.78 4.40 5.12 4.54 ns
–1
0.54 2.22 0.04 1.23 0.39 2.26 1.77 3.22 3.74 4.35 3.87 ns
Notes:
1. Software default selection highlighted in gray.
2. For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-8 for derating
values.
2-50
v1.0