ACE25AC400GL Datasheet, PDF (1/23 Pages) ACE Technology Co., LTD. – SPI NOR FLASH

ACE25AC400GL
SPI NOR FLASH
Description
The ACE25AC400GL is 4M-bit Serial flash supports the standard Serial Peripheral Interface (SPI).
SPI clock frequency of up to 40MHz is supported for fast read command.
Features
 512K-bit Serial Flash
256 bytes per programmable page
 Standard SPI
Standard SPI: SCLK, CS#, SI, SO,
 High Speed Clock Frequency
40MHz for fast read with 30PF load
 Program/Erase Speed
Page Program time: 2.0ms typical
Sector Erase time: 180ms typical
Block Erase time: 0.8s typical
Chip Erase time: 6s/3s typic
 Flexible Architecture
Sector of 4K-byte
Block of 64k-byte
 Low Power Consumption
10mA maximum active current
5uA maximum standby current
 Single Power Supply Voltage: Full voltage range:1.65~1.95V
 Minimum 100,000 Program/Erase Cycle
Absolute Maximum Ratings
Parameter
Ambient Operating Temperature
Storage Temperature
Output Short Circuit Current
Applied Input/Output Voltage
VCC
Value
Unit
-40 to 85
℃
-65 to 150
℃
200
mA
-0.5 to 4.0
V
-0.5 to 4.0
V
VER 1.1 1