7022BG Datasheet, PDF (80/116 Pages) Aavid, Thermal Division of Boyd Corporation – Channel style heat sink with folded back fins

How to decipher an Aavid standard 12 digit part number
Aavid Thermalloy's standard product line in most cases consists of a 12-digit part number sequence. In most standard offerings, Digits 1 through 4,
define the model basic part number. Digits 5 and 6 designate the package style that a particular heat sink is designed to cool. The 7th digit deter-
mines the finish, and the 8th identifies the interface material, if one can be used for that particular style heat sink. The 9th and 10th digits define
the PC board mounting method, and the 11th and 12th digits define the method of attachment of the package to the heat sink. For digits
8,9,10,11 and 12, the absence of any of those options is always designated by a zero in those positions. Important NOTE: The 12 digit part number
sequence is a general format. Due to the different variations and styles of heat sinks, we have included an Option Index on pages 82–84 to show
available options and accessories for the products covered in this catalog.
Standard board level:
5748 02 B 0 37 00 G
A B CDE F G
A = Base Part Number
B = Package Style
C = Finish
D = Interface Material
E = PC Board Mounting
F = Package Mounting
G = RoHS Compliant
To order most Aavid Thermalloy heat sinks, you must use a 12 digit part number using the following options:
Digits 5-6: Package style
Digit 7: Finish
Digit 8: Interface material
CODE
00
01
02
03
04
05
06
08
10
21
22
DEVICE
Blank
TO-218
TO-220, TO-216, TO-217
TO-3
TO-202
TO-5, TO-39
TO-66
TO-247
Multiwatt/SIP
Dual TO-218
Dual TO-220
CODE
B
D
J
M
U
V
W
DESCRIPTION
Black Anodize
Solderable 100% Tin Finish
Pre-Black Anodize
Green Anodize
Unfinished
AavSHIELD3
Black Anodize w/Black Paint
For additional information see page 110
CODE
0
1
2
3
4
7
8
DESCRIPTION
None
One Kon-Dux™ Pad
Two Kon-Dux™ Pads
One In-Sil-8™ Pad
Two In-Sil-8™ Pad
One Hi-Flow® Pad
Two Hi-Flow® Pads
For additional information see pages 86 and 87
Digits 9-10: PC Board mounting
Solderable Wave-On™ mounts
CODE
01
02
03
04*
05
07
09
13
STAND-OFF THREAD
0.100”
#6-32
0.100”
#4-40
0.045”
#4-40
0.100”
#6-32
0.045”
#6-32
0.100”
3.5mm
0.200”
#6-32
0.129”
#6-32
* 0.090 PCB (others 0.062”)
For additional information see page 89
Solderable pins
for board mounted extrusions
CODE
DESCRIPTION
21
Solid Pin with
Stand Off Shoulder 0.050”
25
Solid Solderable Pin
For additional information see page 94
Solderable nut
CODE
DESCRIPTION
13
SNE-2 6-32 UNC-2B
14
SNE-1 4-40 UNC-2B
LENGTH
0.305”
0.305”
For additional information see page 94
Solderable staked on **tabs
CODE DESCRIPTION
28
Shur-Lock™ Tab
(0.130 for 0.062” PC Boards)
31
Centered Horizontal
(0.050 W x 0.130 L)
32
Centered Horizontal
(0.050 W x 0.130 L)
33
Centered Vertical
(0.062 W x 0.340 L)
34
Vertical Pair L & R
(0.075 W x 0.170 L)
35
Vertical Pair L & R
(0.097 W x 0.200 L)
36
Centered Vertical
(0.100 W x 0.150 L)
37
Centered Step
(0.062 W x 0.250 L with 0.125 wide step)
39
Centered Vertical
(0.050 W x 0.375 L)
40
Centered Vertical
(0.050 W x 0.245 L)
43
Centered Step
(0.050 W x 0.375 L)
48
Centered Vertical
(0.062 W x 0.280 L)
53
MT Tab Vertical Pair
(0.090 W x 0.125 L)
54
MT2 Tab Vertical Pair
(0.090 W x 0.125 L)
55
MT3 Tab Vertical Pair
(0.090 W x 0.125 L)
56
Bifurcated Tab Vertical Pair (0.110 W x 0.125 with 0.190 step)
57
Bifurcated Tab Vertical Pair (0.110 W x 0.125 with 0.100 step)
For additional information see pages 91–93
** For additional tab options, please contact
Application Engineering at [phone]
Digits 11-12: Package mounting
Semiconductor mounts
CODE DESCRIPTION
LENGTH
01
#6-32 Female
02
#4-40 Female
03
M-3 Female
04
#6-32 Male
0.380”
05
#4-40 Male
0.380”
For additional information see page 90
Standard clips
Kool-Klips™
Sold separately
CODE
PART#
50
115000
51
115100
52
115200
53
115300
54
115400
62
116200
For additional information see page 97
Thermal clips
Factory applied to heat sink
CODE
PART#
32
TC-1
33
TC-10
34
TC-11
35
TC-12
For additional information see page 98
Studs
CODE
DESCRIPTION
06
SE-2 Stud #6-32
07
SM-3 M-3 Male
08
SE-1 Stud #6-32
09
SE-3 Stud #4-40
11
SF-1 M3 x 0.5
14
SE-4 Stud #6-32
17
SM-1M-3 Male
For additional information see page 96
LENGTH
0.485"
0.350”
0.350"
0.350"
0.302"
0.350"
0.350"
Clinch nuts
CODE
DESCRIPTION
12
CNE-42 4-40 Clinch nut
13
CNM-1 M3 X 0.5 Clinch nut
For additional information see page 95
80
www.aavidthermalloy.com
AMERICA
EUROPE
USA Tel: [phone] email: [e-mail]
ASIA
Italy Tel: [phone] email: [e-mail]
United Kingdom Tel: [phone] email: [e-mail]
Singapore Tel: [phone] email: [e-mail]
Taiwan Tel: [phone] email: [e-mail]