7022BG Datasheet, PDF (111/116 Pages) Aavid, Thermal Division of Boyd Corporation – Channel style heat sink with folded back fins

Snap-On Ejectors / Pullers
FEATURES
• Saves time – no roll pin required
• Excellent for retrofit applications
• Material is nylon per ASTM D4066-82PA162F11
• Cost no more than conventional ejector/puller
• Rated at 222.5N (50 lbs.) / ejector force per pair
• One piece – no assembly required
• May be heat stamped
ORDERING INFORMATION
Part number
5021NG
Card Ejectors
7.14
(0.281)
5021NG Ejector
17.02
(0.670)
13.97
(0.550)
21.26
(0.837)
31.75
(1.250)
Ø 2.49
(0.098)
0.89
(0.035)
2.67
(0.105)
0.51
(0.020)
7.24
(0.285)
Standard Ejectors / Pullers
FEATURES
• Lever action releases card from its connector safely and quickly
• Cards, their components and connectors are less frequently damaged when extracting PC boards
• No special extraction tools are needed for board removal
• Material is nylon per ASTM D4066-82 PA120B4413F24, UL 94 V-O rated (natural color)
• Roll pins are provided (NAS 561-P3-4)
ORDERING INFORMATION
Part number
5005-09NG
5005-08NG
5005-25NG
Figure
A
B
C
FIGURE A
5005-09NG PULLER *
11.12
(0.438)
22.22
(0.875)
9.52
(0.375)
1.90
(0.075)
63.50
(2.500)
3.18
(0.125)
DIA TYP(2)
6.55
(0.258)
*No roll pins provided
50.80
(2.000)
11.12
(0.438)
4.70
(0.185)
FIGURE B
5005-08NG SLIM FACE/ FLAT
FIGURE C
5005-25NG COMBINATION EJECTOR/PULLER
31.75
(1.250)
Ø 2.46
(0.097)
11.10
(0.437)
7.14
(0.281)
7.24
(0.285)
14.27
(0.562)
1.57
(0.062)
15.88
(0.625)
30.48
(1.200)
3.05
(0.120)
ø 2.36
(0.093)
7.14
(0.281)
22.22
(1.875)
6.35
(0.250)
1.78
(0.070)
www.aavidthermalloy.com
AMERICA
EUROPE
USA Tel: [phone] email: [e-mail]
ASIA
Italy Tel: [phone] email: [e-mail]
United Kingdom Tel: [phone] email: [e-mail]
Singapore Tel: [phone] email: [e-mail]
Taiwan Tel: [phone] email: [e-mail]
111