Z51F6412 Datasheet, PDF (8/54 Pages) Zilog, Inc. – Power supply level that can be adjusted with potentiometer R20

Z51F6412 Development Kit
User Manual
1
Introduction
This manual describes how to set up Zilog’s Z51F6412 Development Kit (Zilog part num-
ber Z51F6412000ZCOG) and use it to evaluate your Z8051-based designs and applica-
tions.
The Kit features a development board consisting of five LEDs, five pushbuttons, a buzzer,
port pin headers and a UART-to-USB port. The Board features the Z51F6412 MCU in an
80-pin LQFP package, plus a DBG connector to connect the Board to a host development
PC using the Z8051 USB On-Chip Debugger (OCD) cable. For more details about the
Z51F6412 MCU, please refer to the Z51F6412 Product Specification (PS0303).
This document guides you through the following tasks:
• Install the Z8051 OCD Software and Documentation – see page 6
• Configure the Z8051 OCD and Z51F6412 Development Board – see page 16
• Build and Run the Z51F6412 Demo Project – see page 19
Figure 1 shows an image of the Z51F6412 Development Kit.
UM025901-1112
Figure 1. The Z51F6412 Development Kit
Introduction