Z51F6412 Datasheet, PDF (14/54 Pages) Zilog, Inc. – Power supply level that can be adjusted with potentiometer R20

Z51F6412 Development Kit
User Manual
7
Z8051 OCD Driver Installation
The driver programs for the Z8051 On-Chip Debugger are copied during the software and
documentation installation. In the following procedure for PCs running the Windows 7 32-
and 64-bit operating systems, ensure that the target side of the OCD will remain uncon-
nected while you install these drivers.
Note: If you are running Windows Vista, see Appendix A on page 39 to install your device driv-
ers. If you are running Windows XP, see Appendix B on page 42.
1. Connect the OCD hardware to the USB port of your PC by connecting the A (male)
end of one of the two USB A (male)-to-Mini-B cables with the host PC’s USB port.
Connect the Mini-B end to the OCD device.
2. After the PC detects the new hardware, it will display the Installing device driver soft-
ware dialog shown in Figure 5.
Figure 5. Install Device Driver Dialog, Windows 7
IMPORTANT NOTE: If you should encounter the scenarios indicated in Figures 6 or 7, right-click your
mouse on ZILOG OCD I/F (highlighted in Figure 6) or Unknown device (highlighted in Figure 7) and
select Update Driver Software...
UM025901-1112
Install the Z8051 OCD Software and Documentation