Z8F2480 Datasheet, PDF (10/24 Pages) Zilog, Inc. – Load current up to 3 amps

Z8F2480 Power Monitor with an eZ80F91 Webserver
Reference Design
4. Connect the Zilog UART-to-Serial Adapter (part number 99C1067-001G, included in
the Kit) to Jumper J6 on the Power Board.
5. Connect a serial cable between the DB9 connector of the Zilog Serial Adapter and a
COM port on your PC, as shown in Figure 6.
Figure 6. Power Board with Zilog UART-to-Serial Adapter
6. On your PC, launch a terminal emulation program such as Tera Term or HyperTermi-
nal. Configure this terminal program for 57600 8N1.
7. To apply AC power to the Power Board, plug in the 5V wall adapter, and connect the
barrel connector from the end of the wall adapter cord to Connector J7 on the Power
Board.
8. During system initialization, the eZ80F91 Webserver Module displays its IP address
in the terminal window, as shown in the following example:
RD002702-0814
Page 10 of 24