CC1206ZRY5V7BB475 Datasheet, PDF (8/14 Pages) YAGEO Corporation – SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS

Product specification 8
Surface-Mount Ceramic Multilayer Capacitors ^{General Purpose & High Cap.}
Y5V
14
6.3 V to 50 V
ELECTRICAL CHARACTERISTICS
Y5V DIELECTRIC CAPACITORS; NISN TERMINATIONS
Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions
for testing as given in 5.3 of IEC 60068-1:
- Temperature: 15 °C to 35 °C
- Relative humidity: 25% to 75%
- Air pressure: 86 kPa to 106 kPa
Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time
sufficient to allow the entire capacitor to reach this temperature.
The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.
Table 6
DESCRIPTION
Capacitance range
Capacitance tolerance
Dissipation factor (D.F.)
VALUE
10 nF to 47 µF
±20%
–20% to +80%
≤ 6.3 V
≤ 15%
Exception: 0805 ≥ 22 µF
≤ 20%
10 V
≤ 12.5%
Exception: 0402 ≥ 680 nF; 0603 ≥ 2.2 µF;
≤ 15%
0805 ≥ 10 µF; 1206 ≥ 10 µF
≤ 20%
16 V
≤ 12.5%
Exception: 0603 ≥ 4.7 µF
≤ 15%
≥ 25 V
≤ 9%
Exception: 0201 ≥ 10 nF
≤ 12.5%
Insulation resistance after 1 minute at U_r (DC)
Maximum capacitance change as a function of temperature
(temperature characteristic/coefficient):
R_ins ≥ 10 GΩ or R_ins × C_r ≥ 500 seconds whichever is less
+22% to –82%
Operating temperature range:
–30 °C to +85 °C
Jul 29, 2010 V.5
www.yageo.com