CC1206ZRY5V7BB475 Datasheet, PDF (13/14 Pages) YAGEO Corporation – SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS

Product specification 13
Surface-Mount Ceramic Multilayer Capacitors ^{General Purpose & High Cap.}
Y5V
14
6.3 V to 50 V
TEST
Endurance
TEST METHOD
IEC 60384- 4.14
21/22
PROCEDURE
1. Preconditioning, class 2 only:
150 +0/-10 °C /1 hour, then keep for
24 ±1 hour at room temp
2. Initial measure:
Spec: refer initial spec C, D, IR
3. Endurance test:
Temperature: Y5V: 85 °C
Specified stress voltage applied for 1,000 hours:
Applied 2.0 x U_r for general product.
Applied 1.5 x U_r for high cap. product.
4. Recovery time: 24 ±2 hours
5. Final measure: C, D, IR
P.S. If the capacitance value is less than the minimum
value permitted, then after the other measurements
have been made the capacitor shall be precondition
according to “IEC 60384 4.1” and then the
requirement shall be met.
REQUIREMENTS
No visual damage
<General purpose series>
∆C/C
Class2:
Y5V: ±30%
D.F.
Class2:
Y5V: ≤ 15%
R_ins
Class2:
Y5V: ≥ 1,000 MΩ or R_ins x C_r ≥ 50s
whichever is less
<High Capacitance series>
∆C/C
Class 2:
Y5V: ±30%
D.F.
Class 2:
Y5V: 2 x initial value max
R_ins
Class 2:
Y5V: 1,000 MΩ or R_ins x C_r ≥ 50s
whichever is less
Voltage proof ^{IEC 60384-1 4.6}
Specified stress voltage applied for 1 minute
U_r ≤ 100 V: series applied 2.5 U_r
100 V < U_r ≤ 200 V series applied (1.5 U_r + 100)
200 V < U_r ≤ 500 V series applied (1.3 U_r + 100)
U_r > 500 V: 1.3 U_r
I: 7.5 mA
No breakdown or flashover
Jul 29, 2010 V.5
www.yageo.com