CC1206ZRY5V7BB475 Datasheet, PDF (10/14 Pages) YAGEO Corporation – SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS

Product specification 10
Surface-Mount Ceramic Multilayer Capacitors ^{General Purpose & High Cap.}
Y5V
14
6.3 V to 50 V
TESTS AND REQUIREMENTS
Table 8 Test procedures and requirements
TEST
TEST METHOD PROCEDURE
Mounting
IEC 60384- 4.3 The capacitors may be mounted on printed-circuit boards or
21/22
ceramic substrates
REQUIREMENTS
No visible damage
Visual
inspection and
dimension
check
Capacitance ⁽¹⁾
Dissipation
factor (D.F.) ⁽¹⁾
Insulation
resistance
Temperature
characteristic
Adhesion
4.4 Any applicable method using × 10 magnification
In accordance with specification
4.5.1 Class 2:
At 20 °C, 24 hrs after annealing
Within specified tolerance
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 V_rms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 V_rms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 V_rms at 20 °C
4.5.2 Class 2:
At 20 °C, 24 hrs after annealing
In accordance with specification
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 V_rms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 V_rms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 V_rms at 20 °C
4.5.3 At U_r (DC) for 1 minute
In accordance with specification
4.6 Class 2:
Between minimum and maximum temperature
Y5V: -30 °C to +85 °C
Normal Temperature: 20 °C
<General purpose series>
∆C/C
Class 2:
Y5V: 22% to -82%
<High Capacitance series>
∆C/C
Class 2:
Y5V: 22% to -82%
4.7 A force applied for 10 seconds to the line joining the terminations Force
and in a plane parallel to the substrate
size ≥ 0603: 5N
size = 0402: 2.5N
size = 0201: 1N
NOTE:
1. For individual product specification, please contact local sales.
Jul 29, 2010 V.5
www.yageo.com