C01 Datasheet, PDF (3/12 Pages) Powerbox – 1 WATTS 100-8KV SINGLE OUTPUT DC/DC INDUSTRIAL

ELECTRICAL SPECIFICATIONS^*2 C01 - C80 (100V to 8kV)
PARAMETER
INPUT VOLTAGE
INPUT CURRENT
INPUT CAPACITANCE
PROGRAMMING VOLTAGE
RESPONSE TIME
SETPOINT ACCURACY^*6
GAIN ADJUST^*6
LINEARITY^*6
STABILITY
TEMPCO
THERMAL SHOCK LIMIT
OPERATING TEMPERATURE
STORAGE TEMPERATURE
VALUE
+11.5 to +16V
<100mA, NO LOAD
<250mA, FULL LOAD
440uF LOW ESR
0 to +5V, <100uA
<250msec (FULL LOAD, FULL-SCALE RESPONSE)
+/-1%
5 to 10%
<1% (15% to 100% Vout)
<0.01% / HOUR
<50PPM / °C^*3
1°C / 10 SECONDS
-10 to +60°C^*5 (CASE)
-20 to +90°C
DETAILED PRODUCT DESCRIPTION
The C Series is a line of miniature, regulated high voltage power sup-
plies. Each model is programmed from 0 to 100% of rated output via a 0
to +5 volt, DAC-compatible, high-impedance programming input voltage.
Temperature drift is typically less than 50ppm/°C. These modules exhibit
very low ripple, noise, and EMI/RFI by utilizing a quasi-sinewave oscillator,
shielded transformer, excellent filtering techniques and an isolated steel
enclosure featuring a separate grounding pin. An externally accessible
potentiometer provides adjustable gain trim, allowing for individual calibration
of units. A proprietary encapsulation process and a custom 94V-0 listed,
high-performance formula are used to achieve excellent high voltage and
thermal properties. Positive and negative outputs are standard.
Also available with the C Series are the CM Series adapter kits. For more
details, refer to pages 10 and 11.
C SERIES
WWW.XPPOWER.COM
4711CR
PAGE 3