English
Language : 

XA2C128 Datasheet, PDF (3/16 Pages) Xilinx, Inc – AEC-Q100 device qualification and full PPAP support
◁
R
XA2C128 CoolRunner-II Automotive CPLD
Absolute Maximum Ratings
Symbol
Description
Value
Units
VCC
Supply voltage relative to ground
–0.5 to 2.0
V
VCCIO
VJTAG(2)
Supply voltage for output drivers
JTAG input voltage limits
–0.5 to 4.0
V
–0.5 to 4.0
V
VCCAUX
VIN(1)
VTS(1)
TSTG(3)
JTAG input supply voltage
Input voltage relative to ground
Voltage applied to 3-state output
Storage Temperature (ambient)
–0.5 to 4.0
V
–0.5 to 4.0
V
–0.5 to 4.0
V
–65 to +150
°C
TJ
Junction Temperature
+ 125
°C
Notes:
1. Maximum DC undershoot below GND must be limited to either 0.5V or 10 mA, whichever is easiest to achieve. During transitions,
the device pins may undershoot to –2.0V or overshoot to +4.5V, provided this over or undershoot lasts less than 10 ns and with the
forcing current being limited to 200 mA.
2. Valid over commercial temperature range.
3. For soldering guidelines and thermal considerations, see the Device Packaging information on the Xilinx website. For Pb-free
packages, see XAPP427.
Recommended Operating Conditions
Symbol
Parameter
Min
VCC
Supply voltage for internal logic Industrial TA = –40°C to +85°C
1.7
and input buffers
Q-Grade TA = -40° C to +105° C
1.7
TJ Maximum = +125° C
VCCIO
Supply voltage for output drivers @ 3.3V operation
3.0
Supply voltage for output drivers @ 2.5V operation
2.3
Supply voltage for output drivers @ 1.8V operation
1.7
Supply voltage for output drivers @ 1.5V operation
1.4
VCCAUX Supply voltage for JTAG programming
1.7
Max Units
1.9
V
1.9
V
3.6
V
2.7
V
1.9
V
1.6
V
3.6
V
DC Electrical Characteristics (Over Recommended Operating Conditions)
Symbol
Parameter
Test Conditions
ICCSB
ICCSB
ICC (1)
Standby current Industrial
Standby current Q-grade
Dynamic current
VCC = 1.9V, VCCIO = 3.6V
VCC = 1.9V, VCCIO = 3.6V
f = 1 MHz
f = 50 MHz
CJTAG
JTAG input capacitance
f = 1 MHz
CCLK
Global clock input capacitance
f = 1 MHz
CIO
IIL(2)
IIH(2)
I/O capacitance
Input leakage current
I/O High-Z leakage
f = 1 MHz
VIN = 0V or VCCIO to 3.9V
VIN = 0V or VCCIO to 3.9V
Notes:
1. 16-bit up/down, Resetable binary counter (one counter per function block).
Typical
60
60
-
-
-
-
-
-
-
Max.
200
1.5
2.0
12
10
12
10
+/–10
+/–10
Units
μA
mA
mA
mA
pF
pF
pF
μA
μA
DS554 (v1.1) May 5, 2007
www.xilinx.com
3
Product Specification
 ▷