X28HC64 Datasheet, PDF (8/24 Pages) Xicor Inc. – 5 Volt, Byte Alterable E2PROM

X28HC64
RESETTING SOFTWARE DATA PROTECTION
Figure 8. Reset Software Data Protection Timing Sequence
Vcc
DATA AA
ADDR 1555
CE
55
0AAA
80
1555
AA
1555
55
0AAA
20
1555
WE
≥tWC
STANDARD
OPERATING
MODE
3857 ILL F18.2
Figure 9. Software Sequence to
Deactivate Software Data Protection
WRITE DATA AA
TO ADDRESS
1555
WRITE DATA 55
TO ADDRESS
0AAA
WRITE DATA 80
TO ADDRESS
1555
WRITE DATA AA
TO ADDRESS
1555
WRITE DATA 55
TO ADDRESS
0AAA
WRITE DATA 20
TO ADDRESS
1555
3857 ILL F19.2
In the event the user wants to deactivate the software
data protection feature for testing or reprogramming in
an E²PROM programmer, the following six step algo-
rithm will reset the internal protection circuit. After t_WC,
the X28HC64 will be in standard operating mode.
Note: Once initiated, the sequence of write operations
should not be interrupted.
8