English
Language : 

WM8912 Datasheet, PDF (1/128 Pages) Wolfson Microelectronics plc – Ultra Low Power DAC with Headphone Driver for Portable Audio Applications
w
WM8912
Ultra Low Power DAC with Headphone Driver
for Portable Audio Applications
DESCRIPTION
The WM8912 is a high performance ultra-low power stereo
DAC optimised for portable audio applications.
The device features stereo ground-referenced headphone
amplifiers using the Wolfson ‘Class-W’ amplifier techniques
- incorporating an innovative dual-mode charge pump
architecture - to optimise efficiency and power consumption
during playback. The ground-referenced outputs eliminate
headphone coupling capacitors. The outputs include
common mode feedback paths to reject ground noise.
Control sequences for audio path setup can be pre-loaded
and executed by an integrated control write sequencer to
reduce software driver development and minimise pops and
clicks via Wolfson’s SilentSwitch™ technology.
A dynamic range controller provides compression and level
control to support a wide range of portable recording
applications. Anti-clip and quick release features offer good
performance in the presence of loud impulsive noises.
ReTuneTM Mobile 5-band parametric equaliser with fully
programmable coefficients is integrated for optimization of
speaker characteristics.
Common audio sampling frequencies are supported from a
wide range of external clocks, either directly or generated
using the integrated FLL.
The WM8912 can operate directly from a single 1.8V
switched supply. For optimal power consumption, the digital
core can be operated from a 1.0V supply.
FEATURES
• 3.8mW quiescent power consumption for DAC to
headphone playback
• DAC SNR 96dB typical, THD -86dB typical
• Class W ground-referenced headphone driver
- 28mW per channel into 30Ω at <1% THD
- 32mW per channel into 15Ω at <1% THD
• Dynamic range controller
• ReTune™ Mobile parametric equalizer
• Integrated control write sequencer for pop minimised start-
up and shutdown
• Single register write for default start-up and shutdown
sequences
• On-chip FLL provides all necessary clocks
• DAC supports standard sample rates from 8kHz to 96kHz
• 32-pin QFN package (4x4mm, 0.4mm pitch)
APPLICATIONS
• Portable multimedia players
• Multimedia handsets
• Handheld gaming
WOLFSON MICROELECTRONICS plc
To receive regular email updates, sign up at http://www.wolfsonmicro.com/enews
Production Data, September 2010, Rev 4.0
Copyright ©2010 Wolfson Microelectronics plc