W25Q128FVSIG_13 Datasheet, PDF (84/97 Pages) Winbond – 3V 128M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI

W25Q128FV
9.6 AC Electrical Characteristics⁽⁶⁾
DESCRIPTION
Clock frequency for Read Data instruction (03h)
Clock frequency for QPI Read instructions (0Bh,
EBh, 0Ch), with different dummy clocks
Clock frequency for all other SPI/QPI instructions
2.7V-3.6V VCC & Industrial Temperature
Clock High, Low Time
for all instructions except for Read Data (03h)
Clock High, Low Time
for Read Data (03h) instruction
Clock Rise Time peak to peak
Clock Fall Time peak to peak
/CS Active Setup Time relative to CLK
/CS Not Active Hold Time relative to CLK
Data In Setup Time
Data In Hold Time
/CS Active Hold Time relative to CLK
/CS Not Active Setup Time relative to CLK
/CS Deselect Time (for Array Read Æ Array Read)
/CS Deselect Time (for Erase or Program Æ Read
Status Registers)
Volatile Status Register Write Time
Output Disable Time
Clock Low to Output Valid
2.7V-3.0V / 3.0V-3.6V
Clock Low to Output Valid (Non-array Read)
2.7V-3.0V / 3.0V-3.6V
Output Hold Time
/HOLD Active Setup Time relative to CLK
SYMBOL
fR
ALT
MIN
D.C.
SPEC
TYP
MAX
50
UNIT
MHz
F_R
f_C1 D.C.
33~104 MHz
F_R
f_C1 D.C.
tCLH,
tCLL⁽¹⁾
4
tCRLH,
tCRLL⁽¹⁾
8
tCLCH⁽²⁾
0.1
tCHCL⁽²⁾
0.1
tSLCH
tCSS
5
tCHSL
5
tDVCH
tDSU
2
tCHDX
tDH
3
tCHSH
3
tSHCH
3
tSHSL1 tCSH 10
tSHSL2 tCSH 50
50
tSHQZ⁽²⁾ tDIS
104
MHz
ns
ns
V/ns
V/ns
ns
ns
ns
ns
ns
ns
ns
ns
7
ns
tCLQV1
tV1
7/6
ns
tCLQV2
tV2
tCLQX
tHO
2
tHLCH
5
8.5 / 7.5 ns
ns
ns
Continued – next page
- 83 -