W25Q16DW_12 Datasheet, PDF (73/85 Pages) Winbond – 1.8V 16M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI

W25Q16DW
8.6 AC Electrical Characteristics
DESCRIPTION
Clock frequency for SPI Read data instructions
(03h)
Clock frequency for SPI Quad Read instructions
(6Bh,EBh,E7h,E3h)
Clock frequency for QPI Read instructions(0Bh,
EBh,0Ch) with 2/4/6/8 dummy clocks
(1.7V - 1.95V)
Clock frequency for QPI Read instructions(0Bh,
EBh,0Ch) with 2/4/6/8 dummy clocks, A<1:0>=0,0
(1.7V - 1.95V)
Clock frequency for all other SPI/QPI instructions
(1.7V - 1.95V)
Clock frequency for all other SPI/QPI instructions
(1.65V - 1.95V)
Clock High, Low Time
for all instructions except for Read Data (03h)
Clock High, Low Time
for Read Data (03h) instruction
Clock Rise Time peak to peak
Clock Fall Time peak to peak
/CS Active Setup Time relative to CLK
/CS Not Active Hold Time relative to CLK
Data In Setup Time
Data In Hold Time
/CS Active Hold Time relative to CLK
/CS Not Active Setup Time relative to CLK
/CS Deselect Time (for Array Read Æ Array Read)
/CS Deselect Time (for Erase or Program Æ Read
Status Registers)
Volatile Status Register Write Time
Output Disable Time
Clock Low to Output Valid
Clock Low to Output Valid (for Read ID instructions)
Output Hold Time
/HOLD Active Setup Time relative to CLK
SYMBOL
fR
FR
SPEC
ALT
MIN TYP
MAX
D.C.
50
f_C1 D.C.
80
UNIT
MHz
MHz
FR
f_C1 D.C.
30/50/80/104 MHz
FR
f_C1 D.C.
FR
f_C1 D.C.
FR
f_C1 D.C.
tCLH, tCLL⁽¹⁾
4
tCRLH,
tCRLL⁽¹⁾
tCLCH⁽²⁾
tCHCL⁽²⁾
tSLCH
tCHSL
tDVCH
tCHDX
tCHSH
tSHCH
tSHSL1
tSHSL2
4
0.1
0.1
tCSS 5
5
tDSU 2
tDH 3
3
3
tCSH 5
tCSH 50
tSHQZ⁽²⁾
tCLQV1
tCLQV2
tCLQX
tHLCH
50
tDIS
tV1
tV2
tHO 2
3
30/80/104/104 MHz
104
MHz
80
MHz
ns
ns
V/ns
V/ns
ns
ns
ns
ns
ns
ns
ns
ns
7
ns
7
ns
7
ns
ns
ns
Continued – next page
- 73 -
Publication Release Date: September 06, 2012
Revision F