W25Q16CV_13 Datasheet, PDF (62/81 Pages) Winbond – 3V 16M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI

W25Q16CV
8.3 Power-Up Power-Down Timing and Requirements⁽¹⁾
PARAMETER
VCC (min) to /CS Low
Time Delay Before Write Instruction
Write Inhibit Threshold Voltage
SYMBOL
tVSL
tPUW
VWI
SPEC
MIN
20
5
1.0
Note:
1. These parameters are characterized only.
MAX
2.0
8.4
VCC
VCC (max)
Program, Erase and Write Instructions are ignored
/CS must track VCC
VCC (min)
VWI
Reset
State
tVSL
Read Instructions
Allowed
tPUW
Device is fully
Accessible
UNIT
µs
ms
V
VCC
Figure 38a. Power-up Timing and Voltage Levels
/CS must track VCC
during VCC Ramp Up/Down
Time
/CS
Figure 38b. Power-up, Power-Down Requirement
Time
- 62 -