W93910 Datasheet, PDF (6/35 Pages) Winbond – ERMES PAGING DECODER

W93910
192 OPTION BITS
Detailed description given in Function Description section.
RIC format
IA17−IA0: Basic RIC initial address
BN3−BN0: Basic RIC batch number A(0000)−P(1111)
PA5−PA0: Basic RIC paging area code (000000−111111)
PAEN: Enable PA5−PA0 while PAEN active
GIA17−GIA0: Second RIC initial address
CH3−CH0: Home channel initial value from Channel 0 (0000)−Channel F (1111)
GPA5−GPA0: Second RIC paging area code (000000−111111)
GPAEN: Enable GPA5−GPA0 while GPAEN active
GIAEN: Enable GIA17−GIA0 initial address
ZC2−ZC0: Receiver zone code
CC6−CC0: Receiver country code
OP2−OP0: Receiver operator code
FSN3−FSN0: Frequency subset number (0000−1111)
RPIA17−RPIA0: Remote programming initial address
RPPA5−RPPA0: Remote programming paging area code (000000−111111)
RPZC2−RPZC0: Remote programming zone code
RPCC6−RPCC0: Remote programming country code
RPOP2−RPOP0: Remote programming operation code
RPI: Remote programming index
RF Interface:
RFENL: RFEN pin active level option bit
PLENL: PLEN pin active level option bit
QC1L: QC1 active level option bit
QC2L: QC2 active level option bit
D0IV: D0 input polarity option bit
D1IV: D1 input polarity option bit
PL1−0, RFON, QCON1−0, QC1WTH: RFEN, PLEN, QC1 and QC2 active timing control bits.
uC Interface:
MSGI, MCKI, MDA I: MSGVAL, MCLK, MDATA pin initial state option bit
MCKEG: MCLK active edge;
MCK1−MCK0: MCLK output clock option bits
UDI1−0: MCLK stop clock option
LEDF: LED freq. output selection(1:10/40 kHz; 0:4/16 kHz)
Others:
LKR1−LKR0: SYNC lost hold time option
SIEN: System information output enable option
LPWR: Power saving option
FILT1: Digital filter option
-6-