W9425G6EH Datasheet, PDF (50/50 Pages) Winbond – 4 M × 4 BANKS × 16 BITS DDR SDRAM

W9425G6EH
12. REVISION HISTORY
VERSION
DATE
PAGE
DESCRIPTION
A01
Dec. 12, 2007
All
Formally data sheet
A02
Jan. 04, 2008
5, 25
Revise -4 speed grade Max.IDD4R/IDD4W value from
190mA to 210mA
A03
Feb. 21, 2008
5, 26
Revise -5 speed grade Max. CLK cycle time tCK value
from 10nS to 12nS
23
Change VDDQ max from VDD to 2.7V
5, 25
Modify -4 speed grade DC Characteristics IDD6
parameter value from 5mA to 3mA
9
Add figure to illustrate Initialization sequence after
power-up
Revise overshoot/undershoot pulse width
A04
Apr. 11, 2008
Before VIH (max.) = -1.2V with a pulse width < 3 nS
23
After VIH (max.) = -1.5V with a pulse width < 5 nS
Before VIL (min.) = VDDQ +1.2V with a pulse width < 3 nS
After VIL (min.) = VDDQ +1.5V with a pulse width < 5 nS
26, 27, 29
Revise input setup/hold time tIS/tIH parameters with
skew rate dependency of AC characteristics table
Important Notice
Winbond products are not designed, intended, authorized or warranted for use as components
in systems or equipment intended for surgical implantation, atomic energy control
instruments, airplane or spaceship instruments, transportation instruments, traffic signal
instruments, combustion control instruments, or for other applications intended to support or
sustain life. Further more, Winbond products are not intended for applications wherein failure
of Winbond products could result or lead to a situation wherein personal injury, death or
severe property or environmental damage could occur.

Winbond customers using or selling these products for use in such applications do so at their
own risk and agree to fully indemnify Winbond for any damages resulting from such improper
use or sales.
- 50 -
Publication Release Date:Apr. 11, 2008
Revision A04