W25Q80BW_13 Datasheet, PDF (45/74 Pages) Winbond – 1.8V 8M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI

W25Q80BW
7.2.27 Erase / Program Suspend (75h)
The Erase/Program Suspend instruction “75h”, allows the system to interrupt a Sector or Block Erase
operation or a Page Program operation and then read from or program/erase data to, any other sectors
or blocks. The Erase/Program Suspend instruction sequence is shown in figure 25.
Please contact Winbond for detailed information if this feature is required for a specific design.
/CS
CLK
Mode 3
Mode 0
DI
(IO₀)
DO
(IO₁)
01234567
Instruction (75h)
High Impedance
tSUS
Figure 25. Erase/Program Suspend Instruction Sequence
Mode 3
Mode 0
Accept instructions
- 45 -
Publication Release Date: July 30, 2013
Revision J