W99681CF Datasheet, PDF (43/78 Pages) Winbond – JPEG USB Dual Mode Camera Chip

W99681CF
8.1 General Control Registers
Miscellaneous Control Register (CR00)
Read/Write
Index: 0000H
uC Address: 00H - 01H
Power-on Default: FF00H
15 14 13 12 11 10 9 8 7 6 5 4 3
FS SUS ISO RCV PLL BP Type MS 24M INTE INTC PWR R
210
JR UR MR
Bit 15
Bit 14
Bit 13
Bit 12
Bit 11
Bit 10
Bit 9
Bit 8
Force Suspend Mode (It reflects status of the MD7 pin upon reset)
0 = Force suspend mode when suspend mode is enabled (CR00_14 = 1)
1 = Normal operation
Suspend Mode Enable (It reflects status of the MD6 pin upon reset)
0 = Disable
1 = Enable
Isochronous Handshake Phase Support (It reflects status of the MD5 pin upon reset)
0 = Enable
1 = Disable
Differential RCV Source (It reflects status of the MD4 pin upon reset)
0 = Generated by the SIE
1 = Generated by the USB transceiver
PLL Enable (It reflects status of the MD3 pin upon reset)
0 = Disable
1 = Enable
High Power Device (It reflects status of the MD2 pin upon reset)
0 = Low power device
1 = High power device
DRAM Type (It reflects status of the MD1 pin upon reset)
0 = EDO DRAM
1 = SDRAM
DRAM Size (It reflects status of the MD0 pin upon reset)
0 = 256K× DRAM
- 43 -
Publication Release Date: March 2000
Revision A1