W78E378 Datasheet, PDF (3/38 Pages) Winbond – MONITOR MICROCONTROLLER

Preliminary W78E378/W78C378/W78C374
PIN DESCRIPTION
PIN NAME
RESET
VDD
VSS
VSS
OSCOUT
OSCIN
HIN
VIN
P1.0 (DAC0)
P1.1 (DAC1)
P1.2 (DAC2)
P1.3 (DAC3)
P1.4 (DAC4)
P1.5 (DAC5)
P1.6 (DAC6)
P1.7 (DAC7)
I/O
DESCRIPTION
I/O Chip reset input (active low) input &
Internal reset output (generated by WDT or power low)
TTL Schmitt trigger input, internal pull-up ~30 KΩ
IOL = +12 mA @VOL = 0.45V
- Positive power supply
- Ground
- Ground
O Output from the inverting oscillator amplifier
I Input to the inverting oscillator amplifier, 10 MHz max.
I Hsync input
TTL Schmitt trigger input , w/o PMOS
VIH/VIL = 2.0V/0.8V, V+/ V- = ~1.6V/ 1.1V
I Vsync input
TTL Schmitt trigger input, w/o PMOS
VIH/VIL = 2.0V/0.8V, V+/ V- = ~1.6V/ 1.1V
I/O General purpose I/O, DAC0 special function output
Open-drain output, sink current: 15 mA
I/O General purpose I/O, DAC1 special function output
Open-drain output, sink current: 15 mA
I/O General purpose I/O, DAC2 special function output
Open-drain output, sink current: 4 mA
I/O General purpose I/O, DAC3 special function output
Open-drain output, sink current: 4 mA
I/O General purpose I/O, DAC4 special function output
Open-drain output, sink current: 4 mA
I/O General purpose I/O, DAC5 special function output
Open-drain output, sink current: 4 mA
I/O General purpose I/O, DAC6 special function output
Open-drain output, sink current: 4 mA
I/O General purpose I/O, DAC7 special function output
Open-drain output, sink current: 4 mA
Publication Release Date: December 1999
-3-
Revision A1