W83L786NR Datasheet, PDF (26/50 Pages) Winbond – H/W Monitoring IC

W83L786NR/ W83L786NG
7.7.2 Voltage
INT# interrupt for voltage is Two-Times Interrupt Mode. Voltage exceeding high limit or going below
low limit will causes an interrupt if the previous interrupt has been reset by reading all the interrupt
Status Register. (Figure 15-1)
7.7.3 Fan
INT# interrupt for fan is Two-Times Interrupt Mode. Fan count exceeding the limit, or exceeding and
then going below the limit (set at value ram index 3Bh and 3Ch), will causes an interrupt if the
previous interrupt has been reset by reading all the interrupt Status Register. (Figure 15-2)
Voltage High limit
Voltage Low limit
Fan Count limit
SMI#
*
*
*
*
SMI#
*Interrupt Reset when Interrupt Status Registers are read
*
*
Figure 15-1. Voltage SMI# Mode
Figure 15-2. Fan SMI# Mode
- 21 -
Publication Release Date: March 31, 2006
Revision 0.9