W83193R-02 Datasheet, PDF (15/18 Pages) Winbond – 83.3 MHZ 3-DIMM CLOCK

Preliminary W83193R-02/-04/-04A
connected to VDD if logic 1 is expected. Otherwise, the direct connection to ground if a logic 0 is
desired. The 10 KΩ resistor should be place before the serious terminating resistor. Note that these
logic will only be latched at initial power on.
If optional EMI reducing capacitor are needed, they should be placed as close to the series
terminating resistor as possible and after the series terminating resistor. These capacitor has typical
values ranging from 4.7 pF to 22 pF.
V_DD
Device
Pin
Series
10 KΩ Terminating
Resistor
Clock
Trace
10 KΩ
EMI
Reducing
Cap
Ground
Optional
Ground
Programming Header
VDD Pad
10 KΩ
Device
Pin
Ground Pad
Series
Terminating
Resistor
Clock
Trace
EMI
Reducin
gCap
Optional
Ground
- 15 -
Publication Release Date: April 1999
Revision A1