VSC7135 Datasheet, PDF (1/16 Pages) Vitesse Semiconductor Corporation – 1.25Gbits/sec Gigabit Ethernet Transceiver

Data Sheet
VSC7135
VITESSE
SEMICONDUCTOR CORPORATION
1.25Gbits/sec
Gigabit Ethernet Transceiver
Features
• Gigabit Ethernet Transceiver @ 1.25Gb/s
• Compliant to IEEE 802.3Z PMA
• TTL Interface Compatible to PMA-TBI
• Monolithic Clock Synthesis and Clock
Recovery - No External Components
• 125MHz TTL Reference Clock
• Low Power Operation - 700 mW
• Suitable for Both Coaxial or Optical Link
Applications
• 64 Pin, 14mm or 10mm Standard PQFP
• Single +3.3V Supply
General Description
The VSC7135 is a 1.25Gb/s Ethernet Transceiver optimized for Gigabit Ethernet or 1000Base-X applica-
tions. It accepts 10-bit 8B/10B encoded transmit data, latches it on the rising edge of REFCLK and serializes it
onto the TX PECL differential outputs at a baud rate which is ten times the REFCLK frequency. The VSC7135
also samples serial receive data on the RX PECL differential inputs, recovers the clock and data, deserializes it
onto the 10-bit receive data bus, outputs two recovered clocks at one-twentieth of the incoming baud rate and
detects “Comma” characters. The VSC7135 contains on-chip PLL circuitry for synthesis of the baud-rate trans-
mit clock, and extraction of the clock from the received serial stream. These circuits are fully monolithic and
require no external components.
VSC7135 Block Diagram
EWRAP
R0:9
RCLK
RCLKN
COM_DET
EN_CDET
T0:9
10
QD
Serial to
Parallel
QD
Retimed
Data
Clock
Recovery
2:1
÷ 10
Recovered
Clock
÷ 20
Resync ^Frame
Logic
Comma
Detect
10
DQ
Parallel
to Serial
Serial Data
Synthesized
Clock
DQ
RX+
RX-
TX+
TX-
REFCLK
PLL Clock
Multiply
G52146-0, Rev. 4.0
5/28/98
© VITESSE SEMICONDUCTOR CORPORATION
741 Calle Plano, Camarillo, CA 93012 • 805/388-3700 • FAX: [phone]
Page 1