MMU-0102-VG03 Datasheet, PDF (4/8 Pages) Vishay Siliconix – MELF Resistors with Established Reliability

MMU 0102 VG03, MMA 0204 VG03, MMB 0207 VG03
Vishay Beyschlag
MELF Resistors with Established Reliability
EN 140401-803 ORDERING INFORMATION
Example of the ordering information for a resistor: MMA 0204-50 1 % VG03 49R9
EN140401-803EZRC3715MR49R9FE6
Example of the ordering information for a zero ohm jumper: MMA 0204 VG03 0R0
EN140401-803EZRC3715M-0R00-E6
The elements used in the component number have the following meaning:
EN140401-803
EZ
RC3715M
R
49R9
F
E6
EN detail specification number
Assessment level for the zero-defect approach
Style (size)
Temperature coefficient, according to EN 60062
R = ± 50 ppm/K; P = ± 15 ppm/K
Resistance, according to EN 60062, 4 characters
Tolerance on rated resistance, according to EN 60062
F = ± 1 %; B = ± 0.1 %
Failure rate level according to EN 60115-1, annex ZR
Notes
• The ordering information according to EN 140401-803:2007 shown above succeeds and replaces the ordering information according to earlier
versions of the detail specification EN 140401-803 or its predecessor CECC 40401-803, for example:
CECC 40401-803 EZ RC3715M C 49R9 F E6
CECC 40401-803 S RC3715 C 49R9 F E6
with
EZ; S
Assessment level, where EZ is successor to and superior replacement for S
RC3715M; RC3715 Style, with added suffix M for “metric”
C
Temperature coefficient, according to the detail specification
C = ± 50 ppm/K; E = ± 15 ppm/K.
• EN 140401-803 succeeds the prior specifications CECC 40401-803, CECC 40401-001 (now “Version E”) and CECC 40401-005 (now
“Version A”).
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION
RESISTANCE
TCR
TOLERANCE
MMU 0102 VG03
MMA 0204 VG03
MMB 0207 VG03
± 50 ppm/K
±1%
100  to 2.21 M
1  to 5.11 M
1  to 10 M
± 15 ppm/K
± 0.1 %
100  to 100 k
75  to 100 k
75  to 499 k
Jumper
10 m I_max. = 2 A
10 m I_max. = 3 A
10 m I_max. = 5 A
Note
• According to EN 140401-803, resistance values are to be selected from the E96 series for ± 1 % tolerance and from the E192 series for
± 0.1 % tolerance.
www.vishay.com
For technical questions, contact: [e-mail]
Document Number: 28707
62
Revision: 21-May-12
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000