MMU-0102-VG03 Datasheet, PDF (2/8 Pages) Vishay Siliconix – MELF Resistors with Established Reliability

MMU 0102 VG03, MMA 0204 VG03, MMB 0207 VG03
Vishay Beyschlag
MELF Resistors with Established Reliability
DIMENSIONS
L
K
L₁
D₁
D
DIMENSIONS AND MASS
TYPE
L
(mm)
D
(mm)
L_{1 min.}
(mm)
D₁
(mm)
K
(mm)
MASS
(mg)
MMU 0102 VG03 2.2 + 0/- 0.1
1.1 + 0/- 0.1
1.2
D + 0/- 0.1
0.4 ± 0.05
8
MMA 0204 VG03 3.6 + 0/- 0.2
1.4 + 0/- 0.1
1.8
D + 0/- 0.15
0.8 ± 0.1
22
MMB 0207 VG03 5.8 + 0/- 0.15
2.2 + 0/- 0.2
3.2
D + 0/- 0.2
1.15 ± 0.1
80
Note
• Color code marking is applied according to IEC 60062 ⁽³⁾ in five bands. Each color band appears as a single solid line, voids are permissible
if at least ²/₃ of the band is visible from each radial angle of view. The last color band for tolerance is approximately 50 % wider than the other
bands. An interrupted blue band between the 1^st and 2^nd full band indicates the failure rate level E6. An interrupted orange band between the
4th and 5th full band indicates the temperature coefficient of 15 ppm/K.
PATTERN STYLES FOR MELF RESISTORS
G
X
Y
Z
RECOMMENDED SOLDER PAD DIMENSIONS
TYPE
G
(mm)
WAVE SOLDERING
Y
(mm)
X
(mm)
Z
(mm)
G
(mm)
REFLOW SOLDERING
Y
(mm)
X
(mm)
Z
(mm)
MMU 0102 VG03
0.7
1.2
1.5
3.1
1.1
0.8
1.3
2.7
MMA 0204 VG03
1.5
1.5
1.8
4.5
1.7
1.2
1.6
4.1
MMB 0207 VG03
2.8
2.1
2.6
7.0
3.2
1.7
2.4
6.6
Note
• The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x, or in
publication IPC 7351. They do not guarantee any supposed thermal properties, however, they will be found adequate for most general
applications.
www.vishay.com
For technical questions, contact: [e-mail]
Document Number: 28707
60
Revision: 21-May-12
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000