MMU-0102-VG03 Datasheet, PDF (1/8 Pages) Vishay Siliconix – MELF Resistors with Established Reliability

MMU 0102 VG03, MMA 0204 VG03, MMB 0207 VG03
Vishay Beyschlag
MELF Resistors with Established Reliability
MMU 0102 VG03, MMA 0204 VG03 and MMB 0207 VG03
thin film MELF resistors with established reliability are the
perfect choice for all high-reliability applications typically
found in military, aircraft and spacecraft electronics. These
versions supplement the families of professional and
precision MELF resistors MMU 0102, MMA 0204 and
MMB 0207.
FEATURES
 Approved to EN 140401-803, version E
 Established reliability, failure rate level E6
 Advanced thin film technology
 Pure matte Sn termination on Ni barrier layer
 Single Lot Date Code
 Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
 Medical
 Military
 Aerospace
METRIC SIZE
DIN
0102
EN/CECC
RC2211M
0204
RC3715M
0207
RC6123M
TECHNICAL SPECIFICATIONS
DESCRIPTION
MMU 0102 VG03
MMA 0204 VG03
MMB 0207 VG03
EN/CECC style (size)
RC2211M
RC3715M
RC6123M
Resistance range
100  to 2.21 M; 0 
1  to 5.11 M; 0 
1  to 10 M; 0 
Resistance tolerance
± 1 %; ± 0.1 %
Temperature coefficient
± 50 ppm/K; ± 15 ppm/K
Rated dissipation, P₇₀
Operating voltage, U_max. AC/DC
Permissible film temperature, _{F max.}
Operating temperature range
0.2 W
150 V
0.25 W
200 V
125 C
- 55 °C to 125 °C
0.4 W
300 V
Max. resistance change at P₇₀
for resistance range, |R/R| after:
100  to 221 k
1  to 332 k
1  to 1 M
1000 h
 0.15 % ⁽¹⁾
8000 h
 0.3 % ⁽¹⁾
225 000 h
1%
Permissible voltage against ambient
(insulation):
1 min; U_ins
Continuous
200 V
75 V
300 V
75 V
500 V
75 V
Assessed failure rate level
E6 = 10^-6/h
Quality factor, _Q
Failure rate: FIT_observed
0.3
< 0.1 x 10^-9/h
Notes
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
• The failure rate level E6 (10^-6/h, _Q = 0,3), corresponding to MIL level P, is superior to level E5 (10^-5/h, _Q = 1) and thus may be used as a
replacement.
(1) _{These tightened requirements provide a user advantage over the requirements of EN 140401-803.}
Document Number: 28707
For technical questions, contact: [e-mail]
www.vishay.com
Revision: 21-May-12
59
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000