English
Language : 

MDP16 Datasheet, PDF (4/4 Pages) Vishay Siliconix – Thick Film Resistor Networks, Dual-In-Line, Molded DIP, 01, 03, 05 Schematics
Thick Film Resistor Networks, DIP, Molded
MDP 14, 16
Vishay Dale
PERFORMANCE
TEST
CONDITIONS
Power Conditioning
1.5 rated power, applied 1.5 hours “ON” and 0.5 hour “OFF” for 100 hours
± 4 hours at + 25°C ambient temperature
Thermal Shock
5 cycles between - 65°C and + 125°C
Short Time Overload
2.5 x rated working voltage 5 seconds
Low Temperature Operation 45 minutes at full rated working voltage at - 65°C
Moisture Resistance
240 hours with humidity ranging from 80% RH to 98% RH
Resistance to Soldering Heat
Leads immersed in + 350°C solder to within 1/16" of device body for 3
seconds
Shock
Vibration
Load Life
Total of 18 shocks at 100 G's
12 hours at maximum of 20 G's between 10 and 2,000 Hz
1000 hours at + 70°C, rated power applied 1.5 hours “ON, 0.5 hour “OFF” for
full 1000 hour period. Derated according to the curve.
Terminal Strength
4.5 pound pull for 30 seconds
Insulation Resistance
10,000 Megohm (minimum)
Dielectric Withstanding Voltage No evidence of arcing or damage (200 VRMS for 1 minute)
MAX. ∆R
(Typical Test Lots)
± 0.50% ∆R
± 0.50% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 0.50% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 1.00% ∆R
± 0.25% ∆R
—
—
Document Number: 31511
Revision 06-Aug-02
For Technical Questions, contact: ff2aresistors@vishay.com
www.vishay.com
43