MDP16 Datasheet, PDF (1/4 Pages) Vishay Siliconix – Thick Film Resistor Networks, Dual-In-Line, Molded DIP, 01, 03, 05 Schematics

MDP 14, 16
Vishay Dale
Thick Film Resistor Networks, Dual-In-Line,
Molded DIP, 01, 03, 05 Schematics
FEATURES
• 0.160" [4.06mm] maximum seated height and rugged,
molded case construction.
• Highly stable thick film
• Low temperature coefficient (- 55°C to + 125°C)
± 100ppm/°C
• Reduces total assembly costs
• Compatible with automatic inserting equipment
• Wide resistance range
• Uniform performance characteristics
• Available in tube pack
STANDARD ELECTRICAL SPECIFICATIONS
MODEL/
NO. OF
PINS
SCHEMATIC
RESISTOR
POWER RATING
Max. @ 70°C*
W
RESISTANCE
RANGE
Ω
STANDARD TEMPERATURE
TCR
TOLERANCE COEFFICIENT
TRACKING**
(- 55°C to + 125°C) (- 55°C to + 125°C)
%
ppm/°C
ppm/°C
MDP 14
01
03
05
0.125
0.250
0.125
10 - 2.2M
10 - 2.2M
Consult factory
± 1, ± 2, ± 5
± 1, ± 2, ± 5
± 1, ± 2, ± 5
± 100
± 50
± 50
± 100
MDP 16
01
03
05
0.125
0.250
0.125
10 - 2.2M
10 - 2.2M
Consult factory
± 1, ± 2, ± 5
± 1, ± 2, ± 5
± 1, ± 2, ± 5
± 100
± 50
± 50
± 100
WEIGHT
g
1.3
1.5
* For resistor power ratings @ + 25°C see derating curves.
** Tighter tracking available
ORDERING INFORMATION
01 and 03 Schematics
MDP
MODEL
14
NUMBER OF PINS
01
03
SCHEMATIC
101
RESISTANCE VALUE
First 2 digits (3 for "F"
tolerance) are significant
figures. Last digit
specifies number of zeros
to follow.
G
TOLERANCE
F = ± 1%
G= ± 2%
J = ± 5%
05 Schematic
MDP
MODEL
14
NUMBER OF PINS
05
SCHEMATIC
221
RESISTANCE VALUE R₁
271
RESISTANCE VALUE R₂
First two digits (3 for "F" tolerance) are significant
figures. The last digit specifies the number
of zeros to follow.
G
TOLERANCE
F = ± 1%
G= ± 2%
J = ± 5%
EXAMPLE:
MDP14-03-101G = A dual-in-line thick film resistor network
with 14 pins on 0.100" [2.54mm] centers, 03 Schematic,
resistance of 100 ohm and a tolerance of ± 2%.
EXAMPLE:
MDP14-05-221/271G = A 14 pin dual-in-line thick film
resistor network with 12 series pair of resistors of 220 ohm
and 270 ohm per pair and a tolerance of ± 2%.
www.vishay.com
40
For Technical Questions, contact: [e-mail]
Document Number: 31511
Revision 06-Aug-02