MDP16 Datasheet, PDF (3/4 Pages) Vishay Siliconix – Thick Film Resistor Networks, Dual-In-Line, Molded DIP, 01, 03, 05 Schematics

MDP 14, 16
Vishay Dale
Thick Film Resistor Networks, DIP, Molded
16 Pin Package
3.00
14 Pin Package
2.70
0.380
Single Resistor
03
0.190
- 50
Derating
01 and 05
+ 25
+ 70
+ 125 + 150
Ambient Temperature °C
CIRCUIT APPLICATIONS
01 Schematic
• • •• ••• •
Pin #1
MDP14-01
MDP16-01
13 and 15 resistors with one pin common
The MDPXX-01 circuit provides a choice of 13 and 15 nominally equal
resistors, each connected between a common pin (14 and 16) and
a discrete PC board pin. Commonly used in the following applications:
• MOS/ROM Pull-up/Pull-down
• TTL Input Pull-down
• Open Collector Pull-up
• Digital Pulse Squaring
• "Wired OR" Pull-up
• TTL Unused Gate Pull-up
• Power Driven Pull-up
• High Speed Parallel Pull-up
03 Schematic
Pin #1
MDP14-03
MDP16-03
05 Schematic
7 and 8 isolated resistors
The MDPXX-03 provides a choice of 7 and 8 nominally equal resistors,
each resistor isolated from all others and wired directly across.
Commonly used in the following applications:
• "Wired OR" Pull-up
• Long-line Impedance Balancing
• Power Driven Pull-up
• LED Current Limiting
• Powergate Pull-up
• ECL Output Pull-down
• Line Termination
• TTL Input Pull-down
R1 R1 R1
R1
R2
R2
R2
R1 R1
R1 R1
R2
R2
R2
R2
R1 R1 R1
R2 R2 R2 R2
R1 R1 R1
R2 R2 R2
TTL dual-line terminator; pulse squaring
The MDPXX-05 circuit contains 12 and 14 series pair of resistors.
Each series pair is connected between ground and a common line.
The junction of these resistor pairs is connected to the input terminals.
The 05 circuits are designed for TTL dual-line termination and pulse
squaring.
Pin #1
MDP14-05, MDP16-05
Standard E-24 resistance values stocked. Consult factory
www.vishay.com
42
For Technical Questions, contact: [e-mail]
Document Number: 31511
Revision 06-Aug-02