K3010P_12 Datasheet, PDF (3/7 Pages) Vishay Siliconix – Optocoupler, Phototriac Output, Non-Zero Crossing

www.vishay.com
K3010P, K3010PG Series
Vishay Semiconductors
R_S
V~
I_FT
R_L
95 10813
Fig. 1 - Test Circuit for dV/dt_cr and dV/dt_crq
I_F ≥ I_FT
Test condition:
dV/dt _cr
V_S = 2/3 V_DRM
(sine wave)
R _L = 33 kΩ
dV/dt _crq
V_eff. = 30 V
(sine wave)
R _L = 2 kΩ
I_F = 0
dV/dt _crq
dV/dt _cr
95 10814
dV/dt _cr
dV/dt _crq
Highest value of the “rate of rise of off-state voltage” which does not cause any switching from the
off state to the on state
Highest value of the “rate of rise of communicating voltage” which does not switch on the device again,
after the voltage has decreased to zero and the trigger current is switched from I _FT to zero
Fig. 2
+5V
270
M
TT L
0.1 µF
Galvanic seperation
Fig. 3 - Motor Control Circuit
VAC ~
95 10815
Rev. 2.2, 01-Jun-12
3
Document Number: 83504
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000