K3010P_12 Datasheet, PDF (1/7 Pages) Vishay Siliconix – Optocoupler, Phototriac Output, Non-Zero Crossing

www.vishay.com
K3010P, K3010PG Series
Vishay Semiconductors
Optocoupler, Phototriac Output, Non-Zero Crossing, 250 V_DRM
SMD
DIP
A1
C2
NC 3
6 MT2
5 NC
4 _MT1
FEATURES
• Isolation materials according to UL 94 V-0
• Special construction: therefore, extra low
coupling capacity of typical 0.2 pF, high
common mode rejection
• I_FT of 5 mA, 10 mA, and 15 mA
• Rated impulse voltage (transient overvoltage)
V_IOTM = 8 kV_peak
• Isolation test voltage, 5300 V_RMS, t = 1 s
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
i179041-2
DESCRIPTION
The K3010P, K3010PG series consists of a photo-transistor
optically coupled to a gallium arsenide infrared-emitting
diode in a 6-pin plastic dual inline package
AGENCY APPROVALS
• UL1577, file no. E52744 system code H, double protection
• BSI: BS EN60065:2002 and IEC 60065:2001, certificate
number 7955. An BS EN60950-1:2006 certificate number
7956
• DIN EN 60747-5-5
• CQC: GB8898-2001
APPLICATIONS
Circuits for safe protective separation against electrical
shock according to safety class II (reinforced isolation):
• for appl. class I to IV at mains voltage ≤ 300 V
• for appl. class I to IV at mains voltage ≤ 600 V
according to DIN EN60747-5-5 (VDE0884), suitable for:
- Monitors
- Air conditioners
- Line switches
- Solid state relay
- Microwave
ORDERING INFORMATION
K
3
0
1
0
PART NUMBER
P
#
X
0
#
#
T
TRIGGER
CURRENT
BIN
PACKAGE OPTION
TAPE AND
REEL
DIP-6
7.62 mm
Option 7
G leadform
10.16 mm
AGENCY CERTIFIED/PACKAGE
VDE, cUL, BSI
5 mA
DIP-6
K3012P
DIP-6, 400 mil
K3012PG
SMD-6, option 7
K3012P-X007T
Note
• G = leadform 10.16 mm; G is not marked on the body.
TRIGGER CURRENT, I_FT
10 mA
K3011P
K3011PG
-
> 0.7 mm
15 mA
K3010P
K3010PG
K3010P-X007T
Rev. 2.2, 01-Jun-12
1
Document Number: 83504
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000