DG611A_11 Datasheet, PDF (3/15 Pages) Vishay Siliconix – 1 pC Charge Injection, 100 pA Leakage, Quad SPST Switches

DG611A, DG612A, DG613A
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS (T_A = 25 °C, unless otherwise noted)
Parameter
Limit
Unit
V + to V -
14
GND to V -
Digital Inputs^a, V_S, V_D
7
V
(V -) - 0.3 V to (V +) + 0.3 V
or 30 mA, whichever occurs first
Continuous Current (Any Terminal)
Peak Current, S or D (Pulsed 1 ms, 10 % Duty Cycle)
30
mA
100
Storage Temperature
- 65 to 150
°C
16-pin TSSOP^c
450
Power Dissipation (Package)^b
16-pin miniQFN^d
525
mW
16-pin Narrow SOIC^e
640
16-pin TSSOP
178
Thermal Resistance (Package)^b
16-pin miniQFN
152
°C/W
16-pin Narrow SOIC
125
Notes:
a. Signals on SX, DX, or INX exceeding V + or V - will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC Board.
c. Derate 5.6 mW/°C above 70 °C.
d. Derate 6.6 mW/°C above 70 °C.
e. Derate 8 mW/°C above 70 °C.
f. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead terminal
is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be
guaranteed and is not required to ensure adequate bottom side solder interconnection.
Document Number: 69904
www.vishay.com
S11-1066-Rev. C, 30-May-11
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000