PR01_15 Datasheet, PDF (18/20 Pages) Vishay Siliconix – Power Metal Film Leaded Resistors

www.vishay.com
PR01, PR02 WITH RADIAL TAPING
PR01 - Height for insertion (max.) = 32 mm
P₂
P
H₁
H
H_{0 L L1}
W₀
W
F
α
α
P₀
P₁
D₀
α = 30° to 40°
a
a
PR02 - Height for insertion (max.) = 29 mm
P₂
P
H₁
H
H_{0 L L1}
F
α
α
P₀
P₁
α = 30° to 40°
a
a
W₀
W
D₀
PR01, PR02, PR03
Vishay BCcomponents
DIMENSIONS in millimeters
Pitch of components
P
Feed-hole pitch
P₀
Feed-hole centre to lead 
at topside at the tape
P₁
Feed-hole center to body center
P₂
Lead spacing
F
Width of carrier tape
W
Minimum hold down tape width
W₀
Height for insertion (max.)
H1
Lead wire clinch height
H₀
Body to hole center
H
Feed-hole diameter
D₀
Height for cutting (max.)
L
Minimum lead wire (tape portion)
shortest lead
L₁
12.7 ± 1.0
12.7 ± 0.2
3.85 ± 0.5
6.35 ± 1.0
4.8 +0.7/-0
18.0 ± 0.5
5.5
32
16.5 ± 0.5
19.5 ± 1
4.0 ± 0.2
11.0
2.5
DIMENSIONS in millimeters
Pitch of components
P
Feed-hole pitch
P₀
Feed-hole centre to lead 
at topside at the tape
P₁
Feed-hole center to body center
P₂
Lead spacing
F
Width of carrier tape
W
Minimum hold down tape width
W₀
Height for insertion (max.)
H1
Lead wire clinch height
H₀
Body to hole center
H
Feed-hole diameter
D₀
Height for cutting (max.)
L
Minimum lead wire (tape portion)
shortest lead
L₁
12.7 ± 1.0
12.7 ± 0.2
3.85 ± 0.5
6.35 ± 1.0
4.8 +0.7/-0
18.0 ± 0.5
5.5
29
16.5 ± 0.5
19.5 ± 1
4.0 ± 0.2
11.0
2.5
MARKING
The nominal resistance and tolerance are marked on the resistor using four or five colored bands in accordance with IEC 60062,
marking codes for resistors and capacitors.
Revision: 10-Sep-15
18
Document Number: 28729
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000