593D Datasheet, PDF (11/11 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors Tantamount Commercial, Surface Mount for Switch Mode Power Supplies and Converters

TAPE AND REEL PACKAGING in inches [millimeters]
K
Max.
0.024
[0.600]
Max.
0.059 + 0.004 - 0.0
[1.5 + 0.10 - 0.0]
593D
Vishay Sprague
0.157 ± 0.004
[4.0 ± 0.10]
0.079 ± 0.002
[2.0 ± .050]
0.069 ± 0.004
[1.75 ± 0.10]
B₁ Max.
K₀
Top Cover Tape
A₀
B₀
P
F
W
D₁ Min.
TAPE
SIZE
8mm
12mm
(MBa¹x.)
0.165
[4.2]
0.323
[8.2]
(MDin¹ .)
0.039
[1.0]
0.059
[1.5]
F
0.138 ± 0.002
[3.5 ± 0.05]
0.217 ± 0.002
[5.5 ± 0.05]
K
(Max.)
0.094
[2.4]
0.177
[4.5]
Direction of Feed
P
W
A₀B₀K₀
0.157 ± 0.004
[4.0 ± 1.0]
0.315 ± 0.004
[8.0 ± 1.0]
0.315 ± 0.012
[8.0 ± 0.30]
Notes: A₀B₀K₀ are determined by component size.
The clearance between the component and the
cavity must be within 0.002" [0.05mm] minimum to
0.472 ± 0.012 ^{0.020" [0.50mm] maximum for 8mm tape and 0.002"}
[12.0 ± 0.30] [0.05mm] minimum to 0.026" [0.65mm] maximum
for 12mm tape.
Standard orientation is with the
cathode (-) nearest to the sprocket
holes per EIA-481-1 and IEC 286-3.
Tape and Reel Specifications: All case codes are available
on plastic embossed tape per EIA-481-1. Tape reeling per
IEC 286-3 is also available. Standard reel diameter is 13"
[330mm]. 7" [178mm] reels are available.
Carrier
Top Cover
Tape Thickness
The most efficient packaging quantities are full reel
increments on a given reel diameter. The quantities shown
allow for the sealed empty pockets required to be in
conformance with EIA-481-1. Reel size must be specified
in the Vishay Sprague part number.
Embossment
Cathode (-)
Anode (+)
Direction of Feed
Case
Code
A
B
C
D
E
Tape
Width
8mm
8mm
12mm
12mm
12mm
Component
Pitch
4mm
4mm
8mm
8mm
8mm
Units Per Reel
7" [178] 13" [330]
Reel
Reel
2000
9000
2000
8000
500
3000
500
2500
400
1500
Document Number 40005
Revision 01-Mar-04
For technical questions, contact [e-mail]
www.vishay.com
37