593D Datasheet, PDF (1/11 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors Tantamount Commercial, Surface Mount for Switch Mode Power Supplies and Converters

593D
Solid Tantalum Chip Capacitors
Vishay Sprague
Tantamount^® Commercial, Surface Mount
for Switch Mode Power Supplies and Converters
PERFORMANCE/ELECTRICAL CHARACTERISTICS
Operating Temperature: - 55°C to + 85°C.
(To +125°C with voltage derating.)
Capacitance Range: 0.47µF to 680µF.
FEATURES
• Molded case available in five case codes.
• Compatible with "High Volume" automatic pick and place
equipment.
• High Ripple Current carrying capability.
• Low ESR.
• Meets EIA 535BAAE and IEC Specification QC300801/
US0001.
Capacitance Tolerance: ± 20%, ± 10% standard.
Compliant Terminations
100% Surge Current Tested (C, D, & E Case Sizes)
Voltage Rating: 4 WVDC to 50 WVDC.
ORDERING INFORMATION
593D
TYPE
107
CAPACITANCE
X9
CAPACITANCE
TOLERANCE
010
DC VOLTAGE RATING
@ + 85°C
D
CASE CODE
2
TERMINATION
W
REEL SIZE AND
PACKAGING
This is expressed
in picofarads. The first
two digits are the
significant figures. The
third is the number of
zeros to follow.
X0 = ± 20%
X9 = ± 10%
X5 = ± 5%
(Special Order)
This is expressed in
volts. To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point is
indicated by an "R"
(6R3 = 6.3 volts).
See Ratings
and Case
Codes Table.
2 = Solderable
coating.
Standard.
T = Tape and reel*
7" [178mm] reel
W = 13" [330mm] reel
*Cathode nearest
sprocket hole.
Note: Preferred Tolerance and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage
substitutions will be marked with the higher voltage rating.
DIMENSIONS in inches [millimeters]
T_H MIN.
CASE
CODE
A
B
C
D
E
EIA
SIZE
3216
3528
6032
7343
7343H
Document Number 40005
Revision 01-Mar-04
L
W
H
Tw
L
0.126 ± 0.008
[3.2 ± 0.20]
0.138 ± 0.008
[3.5 ± 0.20]
0.236 ± 0.012
[6.0 ± 0.30]
0.287 ± 0.012
[7.3 ± 0.30]
0.287 ± 0.012
[7.3 ± 0.30]
W
0.063 ± 0.008
[1.6 ± 0.20]
0.110 ± 0.008
[2.8 ± 0.20]
0.126 ± 0.012
[3.2 ± 0.30]
0.170 ± 0.012
[4.3 ± 0.30]
0.170 ± 0.012
[4.3 ± 0.30]
H
0.063 ± 0.008
[1.6 ± 0.20]
0.075 ± 0.008
[1.9 ± .20]
0.098 ± 0.012
[2.5 ± 0.30]
0.110 ± 0.012
[2.8 ± 0.30]
0.158 ± 0.012
[4.0 ± .30]
P
0.031 ± 0.012
[0.80 ± 0.30]
0.031 ± 0.012
[0.80 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
For technical questions, contact [e-mail]
P
Tw
0.047 ± 0.004
[1.2 ± 0.10]
0.087 ± 0.004
[2.2 ± 0.10]
0.087 ± 0.004
[2.2 ± 0.10]
0.095 ± 0.004
[2.4 ± 0.10]
.095 ± 0.004
[2.4 ± 0.10]
T_H(MIN)
0.028
[0.70]
0.028
[0.70]
0.039
[1.0]
0.039
[1.0]
0.039
[1.0]
www.vishay.com
27