PI3740-00 Datasheet, PDF (46/48 Pages) Vicor Corporation – Parallel capable with single wire current sharing

Receiving PCB Pattern Design Recommendations
E1
PIN 1
PI3740-00
e
e
D1
b
PCB LAND PATTERN
b
BB 10x14mm SiP
DIMENSIONAL REFERENCES
REF.
MIN. NOM. MAX.
b
0.50 0.55
0.60
D1
13.00 BSC
E1
9.00 BSC
e
1.00 BSC
Recommended receiving footprint for PI3740-00 10mm x 14mm package. All pads should have a final copper size of 0.55mm x 0.55mm,
whether they are solder-mask defined or copper defined, on a 1mm x 1mm grid. All stencil openings are 0.45mm when using either a 5mil
or 6mil stencil.
Cool-Power^® ZVS Switching Regulators
Page 46 of 48
Rev 1.4
04/2017
vicorpower.com
800 927.9474