TGS2355-SM_15 Datasheet, PDF (9/13 Pages) TriQuint Semiconductor – 0.5-6 GHz 100 Watt GaN Switch

Applications Information
Evaluation Board Layout
RF Layer is 0.020” thick Rogers Corp. 6202, εr =
2.94. Metal layers are 0.5 oz. copper. The microstrip
line at the connector interface is optimized for the
Southwest Microwave end launch connector 292-
02A-5.
The pad pattern shown has been developed and
tested for optimized assembly at TriQuint
Semiconductor. The PCB land pattern has been
developed to accommodate lead and package
tolerances. Since surface mount processes vary
from company to company, careful process
development is recommended.
TGS2355-SM
0.5-6 GHz 100 Watt GaN Switch
EVB Package Mounting Detail
Notes:
1. Flares (as shown) on RF transmission lines are required to achieve best electrical performance.
Datasheet: Rev - 07-18-14
© 2014 TriQuint
- 9 of 13 -
Disclaimer: Subject to change without notice
www.triquint.com