English
Language : 

TC9WMA2FK Datasheet, PDF (7/15 Pages) Toshiba Semiconductor – CMOS Digital Integrated Circuits Silicon Monolithic 2,048-Bit (256 × 8 Bit) Serial E2PROM
TC9WMA2FK
Absolute Maximum Ratings (Note) (GND = 0 V)
Characteristics
Symbol
Rating
Unit
Power supply voltage
Input voltage
Output voltage
Power dissipation
Soldering temperature (in time)
Storage temperature
Operating temperature
VCC
VIN
VOUT
PD
Tsld
Tstg
Topr
−0.3~7.0
V
−0.3~VCC + 0.3
V
−0.3~VCC + 0.3
V
200 (25°C)
mW
260 (10 s)
°C
−55~125
°C
−40~85
°C
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Operating Ranges (Note 1) (GND = 0 V, Topr = −40 to 85°C)
Characteristics
Supply voltage (for reading)
Supply voltage (for writing)
Symbol
VCC
VCC
Test Condition
Min Max Unit
1.8 5.5
V
2.3 5.5
V
Operating Ranges (Note 1) (VCC = 1.8 to 2.7 V, GND = 0 V, Topr = −40 to 85°C)
Characteristics
Low level input voltage
High level input voltage
Operating frequency
Symbol
1.8 V <= VCC < 2.3 V
Min
Max
VIL
0
0.15 × VCC
VIH1
(Note 1)
0.7 × VCC
VCC
VIH2
(Note 2)
0.8 × VCC
VCC
fCLK
0
0.25
2.3 V <= VCC < 2.7 V
Min
Max
0
0.35
1.6
VCC
1.8
VCC
0
0.5
Unit
V
V
MHz
Operating Ranges (Note 1) (VCC = 2.7 to 5.5 V, GND = 0 V, Topr = −40 to 85°C)
Characteristics
Low level input voltage
High level input voltage
Operating frequency
Symbol
2.7 V <= VCC <= 3.6 V
Min
Max
VIL
0
VIH1
(Note 2)
1.6
0.45
VCC
VIH2
(Note 3)
2.2
VCC
fCLK
0
1
4.5 V <= VCC <= 5.5 V
Min
Max
0
0.7
2.0
VCC
3.0
VCC
0
1
Unit
V
V
MHz
Note 1: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Note 2: CS , DI, RST
Note 3: CLK
7
2007-10-19