|
TA1276AFG Datasheet, PDF (40/83 Pages) Toshiba Semiconductor – PAL/NTSC Video Chroma And Deflection IC For CTV | |||
|
◁ |
Note
Parameter
V6 D.ABL Sensitivity
TA1276AFG
Test Conditions (unless otherwise stated, VCC1 = 5 V, VCC2/VCC3/DEF VCC = 9 V, Ta = 25 ± 3°C)
Switching Mode
SW15 SW49 SW50 SW53
Test Conditions
1) Set the BUS control data to the preset value.
2) Turn the Y mute off (1), turn the black stretch gain off (1), and connect pin 8 to an external power supply.
3) With the D.ABL detect voltage at the minimum (000), plot the voltage characteristics of pin 3 in relation to the voltage
of pin 8 when D.ABL sensitivity is at the minimum (000) and the maximum (111).
4) From the diagram, calculate the SDAMIN and SDAMAX gradients.
SDAMIN, SDAMAX = âY/âX
C
ON
A
C
Pin 3
10%
100%
âY
V7 Black Level Compensation
â
OFF
â
10%
Pin 8
âX
1) Set the BUS control data to the preset value.
2) Turn the Y mute off (1), turn the black stretch gain off (1), and observe pin 3.
3) Turn the black level compensation on (1), measure âV1 [mV], and calculate the following formula.
BLC = (âV1/1.4 Ã 103) Ã 100 (IRE)
â
Picture period
âV1 [mV]
40
2002-04-01
|
▷ |