TMP92CH21FG Datasheet, PDF (242/540 Pages) Toshiba Semiconductor – CMOS 32-Bit Microcontroller

TMP92CH21
(9) GET_INTERFACE request
This request returns AlternateSetting value that is set by specified interface.
bmRequestType
10000001B
bRequest
GET_
INTERFACE
wValue
0
wIndex
Interface
wLength
1
Data
Alternate
setting
If there is no specified interface, it enters STALL state.
(10) SET_INTERFACE request
This request selects AlternateSetting in specified interface.
bmRequestType
00000001B
bRequest
SET_
INTERFACE
wValue
Alternate
setting
wIndex
Interface
wLength
0
Data
None
If there is no specified interface, it enters STALL state.
(11) SYNCH_FRAME request
This request transmits synchronous frame of endpoint.
bmRequestType bRequest
10000010B SYNCH_FRAME
wValue
0
wIndex
Endpoint
wLength
2
Data
Frame No.
Automatic answer of this request is not supported.
According to INT_SETUP interrupt, if request received was identified as a
SYNCH_FRAME request, write 2byte data in Frame No after confirming
EP0_DSET_A bit of DATASET register is “0”. When completed, access EOP
register, and write “0” to EP0_EOPB bit, so status stage is finished. This can be
used only where the endpoint supports isochronous transfer type and supports
this request. The process is the same for a vendor request.
Please refer to vendor request section.
92CH21-240
2007-02-28