XC6217_2 Datasheet, PDF(8/33 Page) Torex Semiconductor – High Speed "Green Operation" LDO Voltage Regulators

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

XC6217_2 Datasheet, PDF (8/33 Pages) Torex Semiconductor – High Speed "Green Operation" LDO Voltage Regulators

◁

XC6217 Series

â ELECTRICAL CHARACTERISTICS (Continued)

âXC6217C/D series (Continued)

PARAMETER

SYMBOL

CONDITIONS

MIN. TYP. MAX.

Output Voltage

Temperature Characteristics

VOUT VCE=VIN,IOUT=30mA

Taï½¥VOUT -40â<Ta<85â

- Â±100 -

Ripple Rejection Rate

PSRR

VIN={VOUT(T)+1.0}VDC+0.5VP-PAC

0.85Vâ¦VOUT(T)â¦4.00V

VCE=VIN, IOUT=30mA, f=1kHz

VIN=1.85VDC+0.5VP-PAC

VOUT(T)=0.80V

VCE=VIN, IOUT=30mA, f=1kHz

Limit Current

ILIM

VCE=VIN

200 250

Short Current

ISHORT

VCE=VIN

VOUT is short-circuited at the VSS level.

PS Switching Current

IGOR

VCE=VIN, IOUT: heavy to light load

0.5 -

HS Switching Current

Switch Current

Hysteresis Range

PS Switching Delay Time (*7)

CE High Level Voltage

CE Low Level Voltage

CE High Level Current

CE Low Level Current

CL Auto-Discharge

Resistance (*8)

IGO

IGOhys

tDPS

VCEH

VCEL

ICEH

ICEL

RDCHG

VCE=VIN, IOUT: light to heavy load

IGOhys=IGO- IGOR

VCE=VIN

VCE=VSS

VIN=6.0V, VOUT=4.00V, VCE=VSS

8.0

- 3.5

E-5

1.2 -

6.0

0.3

-0.1 -

0.1

-0.1 -

0.1

780

Ta=25â

UNITS CIRCUIT

ppm/â 1

Î¼s

Î¼A

Î©

NOTE:

* 1: Unless otherwise stated regarding input voltage conditions, VIN=VOUT(T)ï¼1.0V.

* 2: VOUT(E) = Effective output voltage (Refer to the voltage chart E-0 to E-3 chart)

(I.e. the output voltage when an amply stabilized "VOUT(T)ï¼1.0V" is provided at the VIN pin while maintaining a certain

IOUT value.)

* 3: VOUT (T) = Nominal output voltage

* 4: Vdif={VIN1(*6)-VOUT1(*5)}

* 5: VOUT1=A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT {VOUT(T)+1.0V} is input in

the HS mode.

* 6: VIN1=The input voltage when VOUT1 appears as input voltage is gradually decreased.

* 7: Time until HS mode is changed to PS mode by IGOR

* 8: For the XC6217D series only. The XC6217C series discharges by resistors R1 and R2 only as shown in the

block diagrams.

8/33

▷